Connecting to: /dev/ttyUSB0
Changing monitoring state from "Offline" to "Opening serial port"
Connected to: Serial<id=0x661e3e70, open=True>(port='/dev/ttyUSB0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
Changing monitoring state from "Opening serial port" to "Connecting"
Send: N0 M110 N0*125
Recv: start
Recv: echo:Marlin 1.1.8
Send: N0 M110 N0*125
Recv: 
Recv: echo: Last Updated: 2019-01-11 | Author: (Ender-3 Pro)
Recv: echo:Compiled: May 30 2019
Recv: echo: Free Memory: 9448  PlannerBufferBytes: 1232
Recv: echo:SD card ok
Recv: Init power off infomation.
Recv: size:
Recv: 585
Recv: ok
Send: N0 M110 N0*125
Changing monitoring state from "Connecting" to "Operational"
Recv: ok
Send: N0 M110 N0*125
Recv: ok
Send: N1 M115*39
Recv: FIRMWARE_NAME:Marlin Creality 3D SOURCE_CODE_URL:https://github.com/MarlinFirmware/Marlin PROTOCOL_VERSION:1.0 MACHINE_TYPE:Ender-3 Pro EXTRUDER_COUNT:1 UUID:cede2a2f-41a2-4748-9b12-c55c62f367ff
Recv: Cap:SERIAL_XON_XOFF:0
Recv: Cap:EEPROM:1
Recv: Cap:VOLUMETRIC:1
Recv: Cap:AUTOREPORT_TEMP:1
Recv: Cap:PROGRESS:0
Recv: Cap:PRINT_JOB:1
Recv: Cap:AUTOLEVEL:0
Recv: Cap:Z_PROBE:0
Recv: Cap:LEVELING_DATA:0
Recv: Cap:BUILD_PERCENT:0
Recv: Cap:SOFTWARE_POWER:0
Recv: Cap:TOGGLE_LIGHTS:0
Recv: Cap:CASE_LIGHT_BRIGHTNESS:0
Recv: Cap:EMERGENCY_PARSER:0
Recv: ok
Send: M20
Recv: Begin file list
Recv: CHEP_E~1.GCO 301
Recv: CHEP_E~2.GCO 58060
Recv: End file list
Recv: ok
Send: M117 IP 192.168.1.34
Recv: ok
Send: M155 S2
Recv: ok
Recv:  T:20.04 /0.00 B:17.46 /0.00 @:0 B@:0