Changing monitoring state from "Offline" to "Detecting serial port" Serial port list: [u'/dev/ttyACM0'] Connecting to: /dev/ttyACM0 Changing monitoring state from "Detecting serial port" to "Opening serial port" Connected to: Serial(port='/dev/ttyACM0', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor Starting baud rate detection... Changing monitoring state from "Opening serial port" to "Detecting baudrate" Trying baudrate: 115200 Send: N1 M122*35 Recv: === Diagnostics === Recv: RepRapFirmware for Duet 2 Maestro version 2.03beta2 running on Duet Maestro 1.0 Recv: Board ID: 08DJM-9X66L-LG3SJ-6JTD2-3SD6M-KUY6N Recv: Used output buffers: 1 of 20 (13 max) Recv: === RTOS === Recv: Static ram: 19484 Recv: Dynamic ram: 90736 of which 0 recycled Recv: Exception stack ram used: 364 Recv: Never used ram: 20488 Recv: Tasks: NETWORK(ready,672) HEAT(blocked,1272) MAIN(running,3868) IDLE(ready,204) Recv: Owned mutexes: Recv: === Platform === Recv: Last reset 45:41:24 ago, cause: power up Recv: Last software reset at 2019-12-08 20:10, reason: User, spinning module GCodes, available RAM 20504 bytes (slot 0) Recv: Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x04418000 BFAR 0xe000ed38 SP 0xffffffff Task 0x4e49414d Recv: Error status: 0 Recv: Free file entries: 9 Recv: SD card 0 detected, interface speed: 15.0MBytes/sec Recv: SD card longest block write time: 0.0ms, max retries 0 Recv: MCU temperature: min 39.9, current 40.6, max 40.8 Recv: Supply voltage: min 23.7, current 23.8, max 24.1, under voltage events: 0, over voltage events: 0, power good: yes Recv: Driver 0: ok, read errors 0, write errors 0, ifcount 29, reads 20729, timeouts 0 Recv: Driver 1: ok, read errors 0, write errors 0, ifcount 31, reads 20729, timeouts 0 Recv: Driver 2: standstill, read errors 0, write errors 0, ifcount 31, reads 20728, timeouts 1 Recv: Driver 3: standstill, read errors 0, write errors 0, ifcount 13, reads 20728, timeouts 1 Recv: Driver 4: standstill, read errors 0, write errors 0, ifcount 13, reads 20726, timeouts 2 Recv: Driver 5: ok, read errors 0, write errors 0, ifcount 20, reads 20727, timeouts 1 Recv: Driver 6: standstill, read errors 0, write errors 0, ifcount 13, reads 20728, timeouts 0 Recv: Date/time: 2019-12-15 15:57:27 Recv: Slowest loop: 7.90ms; fastest: 0.16ms Recv: I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0 Recv: === Move === Recv: Hiccups: 0, StepErrors: 0, LaErrors: 0, FreeDm: 157, MinFreeDm: 148, MaxWait: 0ms, Underruns: 0, 0 Recv: Scheduled moves: 2221, completed moves: 2215 Recv: Bed compensation in use: none Recv: Bed probe heights: 0.000 0.000 0.000 0.000 0.000 Recv: === Heat === Recv: Bed heaters = 0, chamberHeaters = -1 -1 Recv: Heater 0 is on, I-accum = 0.0 Recv: Heater 1 is on, I-accum = 0.4 Recv: === GCodes === Recv: Segments left: 1 Recv: Stack records: 2 allocated, 0 in use Recv: Movement lock held by null Recv: http is idle in state(s) 0 Recv: telnet is idle in state(s) 0 Recv: file is doing "G1 X110.429 Y108.449 E72.4861" in state(s) 0 Recv: serial is ready with "M122" in state(s) 0 Recv: aux is idle in state(s) 0 Recv: daemon is idle in state(s) 0 Recv: queue is idle in state(s) 0 Recv: lcd is idle in state(s) 0 Recv: autopause is idle in state(s) 0 Recv: Code queue is empty. Recv: === Network === Recv: Slowest loop: 10.88ms; fastest: 0.03ms Recv: Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0) Telnet(0) Recv: HTTP sessions: 2 of 8 Recv: Interface state 5, link 100Mbps full duplex Recv: